How to fix a leaking faucet?

May 23, 2025|

A leaking faucet can be a real nuisance, wasting water and potentially causing damage to your fixtures over time. As a faucet supplier, I've seen firsthand the impact that a faulty faucet can have on both households and businesses. In this blog post, I'll share some practical steps on how to fix a leaking faucet, as well as introduce you to some of the high - quality faucets we offer.

Step 1: Identify the Type of Faucet

The first step in fixing a leaking faucet is to determine what type of faucet you have. There are several common types, including compression, ball, cartridge, and ceramic disc faucets.

Compression faucets are the oldest type and are typically found in older homes. They have two handles, one for hot water and one for cold, and use rubber washers to control the flow of water. Ball faucets are often found in kitchens and have a single lever handle. They use a ball - shaped valve to control water flow and temperature. Cartridge faucets also have a single lever handle and use a cartridge to regulate water. Ceramic disc faucets are a newer design and are known for their durability and smooth operation. They use two ceramic discs to control water flow.

Step 2: Gather Your Tools

Before you start fixing the faucet, you'll need to gather some tools. These may include an adjustable wrench, a screwdriver (both flat - head and Phillips - head), a pair of pliers, a basin wrench, replacement washers or cartridges (depending on your faucet type), and some plumber's tape.

Triple Outlet FaucetPP Pure Water Faucet

Step 3: Turn Off the Water Supply

It's crucial to turn off the water supply before you begin working on the faucet. Locate the shut - off valves under the sink. These are usually small valves with a lever or a knob. Turn them clockwise to shut off the water. If there are no individual shut - off valves under the sink, you may need to turn off the main water supply to your home.

Step 4: Disassemble the Faucet

The disassembly process will vary depending on the type of faucet.

Compression Faucets

  • Remove the handle by unscrewing the screw on top of the handle. This screw may be hidden under a decorative cap.
  • Use a wrench to remove the packing nut.
  • Lift out the stem, and at the end of the stem, you'll find the rubber washer. Remove it.

Ball Faucets

  • Remove the handle by loosening the set screw on the side or bottom of the handle.
  • Remove the decorative cap on top of the faucet body to expose the cam and cam washer.
  • Use a special ball - faucet wrench or an adjustable wrench to remove the retaining ring. Then, lift out the ball assembly.

Cartridge Faucets

  • Remove the handle by removing the screw, which may be under a cap.
  • Use a cartridge puller or a pair of pliers to remove the cartridge.

Ceramic Disc Faucets

  • Remove the handle as with other types.
  • Use a screwdriver to remove the retaining clip or screw that holds the ceramic disc assembly in place, and then lift out the assembly.

Step 5: Inspect and Replace Parts

Once you've disassembled the faucet, carefully inspect the parts. Look for signs of wear, such as cracks, chips, or flattened rubber washers. If you find any damaged parts, replace them with new ones. Make sure to use the correct size and type of replacement parts for your faucet.

For compression faucets, simply replace the rubber washer. For ball faucets, you may need to replace the O - rings, seals, or the ball itself. Cartridge faucets require a new cartridge, and ceramic disc faucets may need new ceramic discs or seals.

Step 6: Reassemble the Faucet

After replacing the parts, it's time to reassemble the faucet. Reverse the disassembly process, making sure to tighten all the nuts and screws properly. Apply a small amount of plumber's tape to the threads of the packing nut or other threaded parts to prevent leaks.

Step 7: Turn On the Water Supply and Test

Once the faucet is reassembled, turn on the water supply by turning the shut - off valves counterclockwise. Check for any leaks around the faucet. If you notice any leaks, tighten the nuts or screws a little more. Let the water run for a few minutes to make sure everything is working correctly.

Our Faucet Offerings

As a faucet supplier, we offer a wide range of high - quality faucets to meet your needs.

The [Triple Outlet Faucet](/workstations/faucet/triple - outlet - faucet.html) is a great choice for those who need multiple water sources. It provides flexibility and can be used in various settings, such as in a large kitchen or a laboratory where different types of water may be required.

If you're looking for a faucet for a laboratory, our [Single Spout Gooseneck Purified Water Faucet for Laboratories](/workstations/faucet/single - outlet - faucet.html) is an excellent option. It is designed to deliver purified water with precision and is built to withstand the rigors of laboratory use.

For applications where pure water is needed, our [PP Pure Water Faucet](/workstations/faucet/pp - pure - water - faucet.html) is a reliable choice. Made from high - quality PP material, it is resistant to corrosion and can ensure the purity of the water.

Conclusion

Fixing a leaking faucet doesn't have to be a daunting task. By following these steps, you can save water and money by repairing the faucet yourself. And if you're in the market for a new faucet, we have a wide selection to choose from. Whether you need a simple kitchen faucet or a specialized laboratory faucet, we've got you covered.

If you're interested in our faucet products or have any questions about faucet repair or installation, we encourage you to reach out for a procurement discussion. We're here to provide you with the best solutions for your faucet needs.

References

  • "The Home Depot Guide to Faucet Repair." The Home Depot.
  • "Plumbing Handbook." McGraw - Hill.
Send Inquiry