What is the installation process for a double outlet faucet in a one - hole sink?
Sep 03, 2025| Hey there! As a supplier of Double Outlet Faucets, I often get asked about the installation process for these faucets in a one - hole sink. So, I thought I'd put together this blog to walk you through it step by step.
Step 1: Gather Your Tools and Materials
Before you start the installation, you'll need to make sure you have all the necessary tools and materials. Here's a list of what you'll typically need:
- Your Double Outlet Faucet (obviously!)
- Adjustable wrench
- Basin wrench
- Teflon tape
- Plumber's putty or silicone caulk
- Bucket or container to catch water
Step 2: Turn Off the Water Supply
This is a crucial step. You don't want water gushing out all over the place when you start working on the faucet. Locate the shut - off valves under the sink. These are usually small knobs or levers. Turn them clockwise until they're fully closed. To be extra sure, turn on the faucet to check if the water has stopped flowing.


Step 3: Remove the Old Faucet (if applicable)
If you're replacing an old faucet, you'll need to remove it first. Start by disconnecting the water supply lines. Use your adjustable wrench to loosen the nuts that connect the lines to the faucet. Be careful, as there might still be some water in the lines. Place your bucket or container under the connections to catch any drips.
Next, use your basin wrench to loosen the mounting nuts that hold the faucet in place. These nuts are usually located under the sink. Once the nuts are loose, you should be able to lift the old faucet out of the sink.
Step 4: Prepare the Sink and Faucet
Clean the area around the sink hole thoroughly. Remove any old putty or caulk. If you're using plumber's putty, roll it into a thin rope and place it around the base of the new faucet where it will sit on the sink. If you prefer silicone caulk, apply a thin bead instead.
Step 5: Install the Faucet
Carefully lower the Double Outlet Faucet into the one - hole sink. Make sure it's centered and level. From under the sink, thread the mounting nuts onto the faucet's shanks. Use your basin wrench to tighten the nuts, but don't over - tighten them. You just want them snug enough to hold the faucet in place.
Step 6: Connect the Water Supply Lines
Now it's time to connect the water supply lines to the faucet. Wrap a few layers of Teflon tape around the threads of the faucet's water inlets. This helps create a watertight seal. Then, attach the hot and cold water supply lines to the appropriate inlets on the faucet. Use your adjustable wrench to tighten the nuts, but again, don't go overboard.
Step 7: Check for Leaks
Once you've connected the water supply lines, turn on the shut - off valves under the sink. Slowly turn on the faucet to let the water flow. Check all the connections for leaks. If you see any drips, use your wrench to tighten the connections a little more.
Step 8: Test the Faucet
Turn the faucet on and off a few times to make sure it's working properly. Check the water flow from both outlets. Adjust the temperature and pressure to your liking.
Additional Tips and Considerations
- If you're having trouble reaching the mounting nuts or water supply connections under the sink, you might want to use a mirror to get a better view.
- Make sure to follow the manufacturer's instructions that come with your Double Outlet Faucet. Different models might have slightly different installation requirements.
As a supplier, we offer a wide range of faucets to meet your needs. For example, if you're interested in a PP Pure Water Faucet, we've got you covered. It's a great option for those who want a reliable and high - quality pure water faucet.
We also have PP Gas Cock for specific gas - related applications. And if you're looking for a wall - mounted option, our Wall - Mounted Single Outlet Faucet is a stylish and functional choice.
If you're in the market for a Double Outlet Faucet or any of our other products, we'd love to have a chat with you. Whether you're a homeowner looking to upgrade your sink or a contractor working on a project, we can provide you with the best products and advice. Reach out to us to start a procurement discussion, and let's find the perfect faucet solution for you.
References
- "Home Plumbing Repair for Dummies" by Richard Trethewey and Gene Hamilton
- Manufacturer's installation guides for Double Outlet Faucets

